SCINCO Inc.

Home > NewsCenter

Introducing Scinco Inc. 1st Motor Grader MG1217

D6114 turbocharged diesel engine that is powerful, efficient and reliable. It boasts large torque backup, low fuel consumption, noise, and exhaust.

Full hydraulic, shoe type service brake system that actuates directly on four rear wheels. Key hydraulic components manufactured by Rexroth.

Hydraulic controlled parking brake uses the disc brake located at the output shaft of the transmission resulting in superior braking performance.

ZF power shift transmission. Imported “NO-SPIN” limited slip differential in drive axle. The tandem is driven by a heavy-duty chain with superior reliability, and long service life.

Full hydraulic front wheel steering accompanied with front and rear articulated frame ensuring superior maneuverability.

Imported HUSCO multi-way valve. Patented air pressure adjustable control console, which is locked in position by a pedal, delivers flexibility and ease of control.

Electro-hydraulic controlled implement, containing seven-hole lock-bars and tapered-pin locked swing arm, can be precisely positioned. The implement features long reach moldboard and superior rigidity. The Y-frame drawbar is constructed from two solid beams that can bear more loads. The longer moldboard improves working efficiency.

Six forward gears and three reverse gears with travel speeds up to 36km/H.

Fully enclosed cabin is equipped with Air Conditioning and fully adjustable suspension seat to create a safe and comfortable working environment for the operator. Large windows also allow a clear view of the moldboard

Scinco Inc. and our International Construction Equipment company partner have made quality control for the MG1217 the top priority.
Benjamin Wei is our Senior Sales Engineer. Mr. Wei spent 15 years as an engineer for Volvo Construction Equipment. He has many years experience with Motor Graders.
During a two week period in June we had three Scinco representatives working with the manufacture, CG, to insure performance standards and make adjustments.
CG has shown a great willingness to make adjustments to the product to suit the demanding needs of all our customers.
All machines supplied will undergo the same tests prior to shipment.
The following test method protocols were followed

    GB/T8506－1987 Motor Grader Performance & Experimentation Method
    GB/T14782—1993 Motor Grader Technology Qualification
    GB/T16278－1996 Motor Grader Reliability Experimentation Method

The manufacturing plant for CG is ISO9001 certified. They are a joint venture partner of Kobelco.

Category	Description	Units	Performance
Operating Weights	Front Axle	KG	4100
	Rear Axle	KG	10400
	Total	KG	14500
Engine	Rated Power	kW/HP	156/209
	RPM	RPM	2400
Dimensions	Standard	mm (WxLxH)	8870 x 2600 x 3430
	With Ripper	mm (WxLxH)	9500 x 2600 x 3430
	Between Front and Rear Axle	mm	6130
Moldboard	Length	mm	3680 (12 feet)
	Height	mm	610
	Max Tilt Angle	(°)	90
	Max Lift	mm	410
Ripper	Max Depth	mm	315
	Shanks	Piece	5

Description		Units	MG1217	Cat 120H	Cat 140H
Operating Weights	Front Axle	KG	4100
	Rear Axle	KG	10400
	Total	KG	14500	11358	13552
Engine	Rated Power	kW/HP	156/209	104/140	138/185
	RPM	RPM	2400	2000	1900
Dimensions	Standard	mm (LxWxH)	8870x2600x3430	8260x2400x3105	8490x2460x3120
	With Ripper	mm (LxWxH)	9500x2600x3430	9645x2435x3330	10000x2460x3120
	Between Front and Rear Axle	mm	6130	5870	6009
Moldboard	Length	mm	3680 (12 feet)	3658	3680
	Height	mm	610	610	610
	Max Tilt Angle	(°)	90	90
	Max Lift	mm	410	457	480
Ripper	Max Depth	mm	315	262	462
	Shanks	Piece	5	5	5

Speification for Caterpillar from Performance Handbook 36